How to Cut PEX Pipe Like a Pro

In this blog post, we’ll show you how to cut PEX pipe like a pro. We’ll go over the different types of PEX pipe cutters and give you some tips on how to get a clean, straight cut.

Checkout this video:


In this guide, we will show you how to cut PEX tubing like a pro. PEX is a great alternative to copper pipe because it is flexible and easy to work with. However, cutting PEX tubing can be tricky because it is made of a soft material that can easily be damaged.

There are two main ways to cut PEX tubing: with a ratcheting cutter or a hacksaw. Ratcheting cutters are the best option because they make clean, straight cuts and they are less likely to damage the tubing. Hacksaws can also be used, but they require more effort and they can damage the tubing if you are not careful.

When cutting PEX tubing, it is important to make sure that the cuts are straight. If the cuts are not straight, the tubing will not fit together properly when you go to connect it. You can use a tape measure or a ruler to make sure that your cuts are straight.

It is also important to deburr the edges of the tubing after you have cut it. This means removing any sharp edges from the cut so that it is safe to handle. You can deburr the edges with a file or a deburring tool.

Now that you know how to cut PEX tubing like a pro, you are ready to start your next plumbing project!

Materials Needed

In order to cut PEX pipe like a pro, you will need the following materials:
-PEX pipe
-PEX cutter
-Ruler or measuring tape
-Utility knife
straight edge (optional)

Once you have gathered all of the necessary materials, you are ready to cut your PEX pipe like a pro!

Step-by-Step Instructions

If you’re doing a plumbing or home improvement project that involves PEX piping, you’re going to need to know how to cut it. The good news is that it’s actually pretty easy to do, as long as you have the right tools and follow a few simple steps. Here’s what you need to know about how to cut PEX pipe like a pro.

What You Need
First things first, you need to make sure you have the right tools for the job. For cutting PEX pipe, you will need:
-A sharp knife or scissors
-A tubing cutter (this is optional but can make the job easier)
-A straightedge (again, optional but can be helpful)

1. Measure your pipe. You will need to know how long of a piece you need before you start cutting so take measurements and mark your pipe accordingly. Make sure to allow for any fittings or connections that you will need to make.
2. If you are using a tubing cutter, attach it to the pipe at your starting point and tighten until it is snug. If you are not using a tubing cutter, simply mark your starting point with a pencil or pen.
3. Begin cutting the pipe. If you are using a tubing cutter, rotate around the pipe as you tighten the tool in order to make an even cut. If you are not using a tubing cutter, simply use your knife or scissors to carefully cut along your marked line.
4. Continue cutting until you reach your desired length. Again, if using a tubing cutter be sure to rotate it evenly as you go; if not using one, just be extra careful not make jagged cuts with your knife or scissors. 5 Cut slowly and steadily until you reach the end of your marked line; then stop!
5 deburr the cut end of the pipe (if necessary). This step is only necessary if there are any sharp edges on the end of your newly cut pipe; if so, simply use a file or sandpaper to smooth them out before proceeding with your project

Tips and Tricks

If you’re looking for an easy way to cut PEX pipe, there are a few things you need to know. The first is that there are two different types of PEX piping – plastic and metal. Plastic PEX is easier to cut, but metal PEX is more durable. If you’re not sure which type of PEX you have, ask a professional or look at the manufacturer’s instructions.

There are a few different ways to cut PEX pipe. The most common is with a tubing cutter. This is a handheld tool that has a clamping mechanism and a cutting blade. To use it, simply clamp the tubing cutter onto the pipe where you want to make your cut and rotate the tool around the pipe. The cutting blade will score the pipe, making it easy to snap the pipe in two at your desired location.

If you don’t have a tubing cutter, you can also use a sharp utility knife or a rotary tool with a cutting attachment. Simply place the blade of your chosen tool against the pipe and apply pressure until it cuts through. Remember to wear gloves and eye protection when using sharp tools!

Once you’ve made your cut, smooth any rough edges with sandpaper before connecting your pipes together.


In conclusion, when it comes to cutting PEX pipe, there are a few different ways that you can go about it. You can use a hacksaw, a utility knife, or a pipe cutter. Each of these methods has its own set of pros and cons, so it’s really up to you to decide which one is the best for your needs. However, we would recommend using a pipe cutter if you have the option, as it will give you the cleanest cut and is generally the easiest method to use.