If you’re looking to learn how to cut copper pipe like a pro, then you’ve come to the right place. In this blog post, we’ll show you everything you need to know in order to make clean, precise cuts every time.
Checkout this video:
Introduction
If you’re a home improvement novice, the prospect of cutting your own copper pipe may seem daunting. After all, even experienced plumbing professionals can damage a pipe if they’re not careful. However, with the right tools and a little bit of practice, cutting copper pipe is actually quite easy. In fact, once you get the hang of it, you’ll be able to cut clean, straight lines with ease.
Here’s what you’ll need to get started:
-A sharp pencil
-A tape measure
-A hacksaw with a new blade
-A file
-Sandpaper
Once you have your tools assembled, follow these steps to cut your copper pipe like a pro:
What You’ll Need
When it comes to cutting copper pipe, there are a few things you’ll need in order to get the job done right. Here’s a quick rundown of what you’ll need:
-A sharp pipe cutter
-A clean, level work surface
-A steady hand
-Patience
With these four things, you’ll be able to cut copper pipe like a pro in no time. Let’s get started!
Cutting the Pipe
If ’re cutting copper pipe with a tubing cutter, start by tightening the cutter so that its blade is touching the pipe. Then, rotate the cutter around the pipe 3-4 times to score a line around it. After you’ve scored the line, tighten the cutter one more time and then rotate it around the pipe again until the blade is touching the score line. Finally, twist the cutter handle to break off the piece of pipe.
Deburring the Pipe
Pipe cutters work by scoring the copper pipe as you turn the cutter around the pipe. This leaves a clean, burr-free cut. However, the burr can still be sharp and can cause problems if it’s not removed.
There are two ways to remove the burr: with a deburring tool or with a file. A deburring tool is a small, hand-held tool that has a rotating blade. You simply place the tool over the end of the pipe and rotate it until the burr is gone.
A file is also effective, but it takes a little more time and effort. You’ll need a half-round file that’s large enough to fit over the end of the pipe. Place the file over the end of the pipe and drag it across the cut, moving it back and forth until the burr is gone.
Reaming the Pipe
Reaming the pipe is an important step in cutting copper pipe. This step helps to ensure a clean, precise cut. You will need a reamer tool, which can be purchased at any hardware store.
To ream the pipe, start by inserting the reamer into the end of the pipe. Turn the tool clockwise and apply pressure until you feel the reamer scratching the inside of the pipe. Continue turning and applies pressure until you have gone all the way around the circumference of the pipe. Be careful not to over-ream the pipe, as this can damage it.
Tips and Tricks
-Whether you’re a professional plumber or a DIYer, there are a few things you need to know before you start cutting copper pipe. Here are some tips and tricks to help you get the job done like a pro.
-Before you start cutting, it’s important to measure the pipe accurately. Use a tape measure or ruler to get the right measurements, and mark the pipe with a pencil so you know where to make your cuts.
-When it comes to actually cutting the pipe, there are two main methods you can use: a tubing cutter or a hacksaw. If you have a steady hand and are careful not to overcut, a hacksaw can work well. However, for best results we recommend using a tubing cutter. This tool is designed specifically for cutting copper pipe and will give you a clean, precise cut.
-Once you’ve made your cut, it’s important to deburr the edges of the pipe so they’re smooth. You can do this with a deburring tool or even just sandpaper.
With these tips in mind, you’re ready to start cutting copper pipe like a pro!
Conclusion
Now that you know how to cut copper pipe like a pro, you can tackle any home improvement or plumbing project with confidence. With the right tools and a little bit of practice, cutting copper pipe is a relatively simple task that almost anyone can do.
