How to Cut Corrugated Metal

Looking to tackle a home improvement project that involves cutting corrugated metal? In this blog post, we’ll walk you through the basics of how to do it.

Checkout this video:


Corrugated metal is often used for roofing, siding and other construction materials. It’s a versatile material that can be cut with a variety of tools, including a circular saw, tin snips or an angle grinder.

In this article, we’ll show you how to cut corrugated metal with a circular saw, tin snips and an angle grinder. We’ll also give you some tips on how to choose the right tool for the job and how to avoid common mistakes.

Tools You Will Need

When cutting corrugated metal, you will need a few basic tools in order to get the job done safely and effectively. First, you will need a sharp Metal Cutting blade. A dull blade will not only make the job more difficult, but it can also be dangerous. Second, you will need a straight edge to guide your cuts. A ruler or a piece of scrap wood will work perfectly for this. Finally, you may want to wear gloves to protect your hands from the sharp edges of the metal.

Now that you have your tools, you are ready to start cutting The first step is to mark your cut line with a pencil or chalk. Then, using your straight edge as a guide, slowly and carefully cut along the line with your metal cutting blade. Be sure to keep your fingers clear of the blade! Once you have made your cut, use a file or sandpaper to smooth out any rough edges.

And that’s all there is to it! With these simple tips you can easily cut corrugated metal without any problem.

Cutting the Metal

When it comes to cutting corrugated metal, there are a few different ways that you can go about it. One of the most popular methods is to use a power saw, such as a circular saw or jigsaw. However, if you don’t have access to a power saw, you can also use a manual hand saw or even tin snips.

If you’re using a power saw, the best way to cut corrugated metal is to use a blade that is specifically designed for cutting metal. This type of blade will have teeth that are made out of hardened steel and are spaced out evenly. It’s important to make sure that the blade you use is sharp, otherwise it will cause the metal to tear instead of cut.

If you don’t have access to a power saw, you can still cut corrugated metal using a manual hand saw or even tin snips. The key is to use a blade that is designed for cutting metal so that it will be sharp enough to make clean cuts. You may need to make more than one pass with the saw or tin snips in order to cut all the way through the metal.

Once you have your cut lines marked out, simply place the blade of your chosen tool at the start of the line and then slowly and carefully guide it along the line until you reach the end. If you’re using a power saw, be sure to keep your hands well away from the blade as it cuts through the metal.

Finishing Up

Now that you have your corrugated metal all cut out and ready to go, you need to give it a good finishing. This will protect the metal from corrosion and also give it a nice sheen.

You can use a variety of methods to finish your corrugated metal. One popular method is to use a clear lacquer or enamel. You can also use paint, but make sure it is made specifically for metals. You should also consider sealing the edges of the metal with tape or sealing compound to further protect it from the elements.