If you’re looking to build an 8-deck blackjack table, you’ll need to purchase some quality hardware. Here’s a quick rundown of what you’ll need to get started.
Checkout this video:
Decks
If you are looking to add an 8-deck to your home, you will need to make sure that you have the right hardware to support it. The size of the deck will dictate the size of the hardware you need. Here is a breakdown of what you will need.
8 Decks
An 8-deck system would require 160 feet of 2×6 joists. If the joists are spaced at 16 inches on center, then 9,280 square feet of decking would be required.
What Size Hardware Do You Need for an 8 Deck?
If you are building an 8 deck, you will need 14 rings and 8 posts.
Tools
An 8-deck of cards is a lot of cards. If you’re playing a game that requires you to hold all the cards in your hand, you’re going to need a lot of space. The same goes for hardware. You need to have enough hardware to support an 8-deck of cards.
Jigsaw
A jigsaw is one of the most versatile tools you can have in your arsenal, and it’s also one of the most fun to use. With the right blade, a jigsaw can easily cut through wood, metal, plastic, and even ceramic tile. If you’re looking for a tool that can do it all, a jigsaw is the way to go.
When it comes to choosing a jigsaw, there are two things you need to consider: the size of the blade and the type of power source. The size of the blade will determine how big of a piece you can cut, and the type of power source will determine how fast and how easily you can make your cuts.
Blade Size
The size of the blade is measured in inches, and the most common sizes are 3 inches and 4 inches. A 3-inch blade is good for general purpose cuts, while a 4-inch blade is better for larger pieces or tougher materials.
Power Source
The two main types of power sources for jigsaws are corded and cordless. Corded jigsaws are more powerful and can run for hours without needing to be recharged, but they’re also tethered to an outlet which can be inconvenient. Cordless jigsaws are much more portable, but they need to be recharged frequently and may not have as much power as their corded counterparts.
Drill
For an 8-deck, you’ll need a 3/32″ drill bit and a power drill.
Saw
If you’re planning on building an 8 deck, you’ll need a saw. The type of saw you’ll need will depend on the lumber you’re using. For example, if you’re usingpressure-treated lumber, you should use a blade that’s designed specifically for that material. If you’re using cedar or redwood, a standard blade will suffice. In general, a crosscut blade with 18 teeth per inch (tpi) will work well for most lumber.
When choosing a saw, keep in mind that the size of the blade will determine the maximum width of the lumber that can be cut. For example, if you have a 10″ saw, the maximum width of lumber that can be cut is 10″. If you’ll be cutting lumber that’s wider than the blade on your saw, you’ll need to use a ripping blade. Ripping blades have more teeth per inch (tpi), which makes them ideal for cutting along the grain of the lumber.
Materials
8 decks of cards- A standard deck of 52 cards is required for each player. Jokers may be used if desired but are not necessary. It is also recommended that players have a way to keep track of the score, like a whiteboard or piece of paper. A deck of cards is all that is necessary to play an 8 deck, but there are variations that can be added.
Lumber
The wood you’ll use for your eight-deck project can be pressure-treated lumber, redwood or cedar. If you choose pressure-treated lumber, make sure to get boards that are rated for ground contact; they will have a greenish tint. The price per square foot will vary depending on the type of wood you select. You should also factor in the cost of screws, joist hangers and other hardware needed to complete your project.
Nails
The most important factor in deciding what size hardware you need for an 8 deck is the thickness of the lumber you will be using. If you are using standard 1×6 lumber, then a 3 inch nail should be sufficient. However, if you are using thicker lumber or are concerned about the stability of your deck, then you may want to use a 4 inch nail.
Screws
The size, length, and gauge of the screws you use for a deck project are critical to the success of that project. With that in mind, you need to select the right screws for your project and that means understanding a little about screws.
In general, you will want to use screws that are at least 3-1/2 inches long for most projects. The reason for this is that shorter screws are more likely to strip out when they are driven into hardwood.
As far as gauges go, you will want to use 8 or 10 gauge screws for most applications. The smaller the number, the thicker the screw. Thicker screws can hold more weight and they are less likely to strip out when driven into hardwood.
Instructions
Step One
The 8-deck system is the standard for most commercial applications, but can be used in residences as well. The two main types of 8-deck hardware are the controller and the player.
The controller is the central processing unit for the system and is responsible for managing all aspects of game play. It is typically a standalone box that is connected to the player hardware via a network or USB cable.
The player hardware consists of an input device (typically a keyboard or keypad) and a display device (usually a monitor). The input device is used to enter commands and make selections, while the display device shows information such as the current game state, player statistics, and other relevant data.
In most cases, both the controller and player hardware will need to be purchased separately. However, there are some all-in-one units available that include both the controller and player hardware in a single package.
When choosing 8-deck hardware, it is important to consider the specific needs of your application. For example, if you are using the system for commercial purposes, you will likely need to purchase additional licenses for each player in order to comply with licensing regulations.
Step Two
Now that you have chosen the perfect site for your 8-deck home improvement project, it is time to start gathering the necessary materials. The first step is to determine the amount of joist needed to build your deck. To do this, you will need to measure the length and width of your building site. Once you have these dimensions, you can calculate the area of your site in square feet by multiplying the length by the width. Once you have determined the square footage of your building site, you can find out how much lumber you will need for your project by consulting the joist chart below.
Length of Joist (in feet) x Width of Joist (in feet) /2= Square footage of building site
6’ x 12’ / 2 = 36 square feet
8’ x 16’ / 2 = 64 square feet
10’ x 20’ / 2 = 100 square feet
Step Three
Now that you have all of your materials, you need to measure and cut your lumber. For an 8-foot (2.4 m) deck, you’ll need:
-8 – 2” x 6” x 8’ (5.1 cm x 15.2 cm x 2.4 m) lumber for the joists
-24 – 5/4” x 6” x 8’ (1.3 cm x 15.2 cm x 2.4 m) lumber for the decking
-16 – 2” x 4”s cut to 8’ (5.1 cm x 10.2 cm) for the ledger board, skirt boards, and stairs
-6 – 4” x 4”s cut to 8’ (10.2 cm 10.2 cm) for the posts
If you want a railing, you will also need:
-1 box of 100 1 1/4″ screws for the ledger board
-12 2″x4″s or 1″x6″s cut to 4′ (10.2cmx121.9cm) or 6′ (15.2cmx182.9cm) lengths for the top and bottom rails
-36 balusters or spindles
