How to Cut Wire Shelving for Your Next Project

Cutting wire shelving can be a tricky task.
In this blog post, we will show you how to cut wire shelving for your next project in a few simple steps.

How to Cut Wire Shelving for Your Next ProjectCheckout this video:

Cutting Wire Shelving

Wire shelving is a versatile storage solution that can be used in a variety of settings, from kitchen pantries to garage workshop areas. If you’re planning a wire shelving project, you’ll need to know how to cut the shelving to the correct size. In this article, we’ll show you how to cut wire shelving for your next project.

Measuring and Marking the Wire Shelving

Before cutting the wire shelving, you will need to take measurements and mark the desired cut lines.Using a tape measure, measure the length and width of the wire shelving unit. Make a small mark at each measurement with a pencil.

Once you have measured and marked the desired length and width of the wire shelving unit, use a straight edge to draw a line connecting the marks. This will be the cut line.

Cutting the Wire Shelving

Wire shelving is a great way to organize your home, garage, or office. But what do you do when you need to cut the wire shelving to fit a particular space?

Here are some tips on how to cut wire shelving:

-First, measure the space where you will be cutting the wire shelving.
-Next, mark the spot on the wire shelving where you will be making the cut.
-Then, use a pair of wire cutters to cut through the marked spot on the wire shelving.
-Finally, use a file or other sharp object to smooth down any sharp edges on the cut wire shelving.

Finishing the Cut Wire Shelving

Cutting wire shelving can be a bit tricky, but with a few simple tips, you can get perfect cuts every time. First, you’ll need to measure the area where you’ll be cutting the shelving. Next, use a sharp blade to cut through the wire. Finally, finish the cut by bending the wire back and forth until it breaks.

Deburring the Cut Wire Shelving

Assuming you have a clean cut, the next step is to remove any burrs that might be leftover on the wire. Burrs are those sharp pieces of metal that can snag on clothing or skin, and they can be pretty dangerous if you’re not careful.

There are a few different ways that you can deburr your wire shelving:

– Use a deburring tool: This is a specialized tool that looks like a rotary file. It’s designed specifically for removing burrs from metal, and it works great on wire shelving.

– Use a file: If you don’t have a deburring tool, you can use a regular file to remove the burrs. Just be careful not to damage the wire.

– Use sandpaper: Another option is to use sandpaper to deburr the metal. This works especially well if the burrs are small. Just be sure to use a high-grit sandpaper so you don’t damage the wire.

Filing the Cut Wire Shelving

Once you have cut your wire shelving to size, it is important to file down the sharp edges to prevent injury. A simple file will do the trick, or you can use a power sander if you have one. Be sure to wear eye protection when working with power tools.