How to Cut a T-Shirt Neck

How to Cut a T-Shirt Neck – Follow these simple steps and you’ll be able to cut a t-shirt neck in no time!

Checkout this video:


To cut a T-shirt neck, you will need the following materials: a T-shirt, a sharp pair of scissors, and a ruler or a measuring tape. You will also need a pen or a marker. First, put on the T-shirt so that you can mark where you want to cut. Use the ruler or measuring tape to measure the width of the neck opening, and then use the pen or marker to mark the measurement on the T-shirt. Next, take off the T-shirt and lay it flat on a cutting surface. Using the scissors, cut along the marked line.


A T-shirt is a compression garment that is usually made of a cotton knit fabric. It is worn by both men and women and has become a very popular item of clothing. It is often seen as an outer layer of clothing but can also be worn as an undershirt. The T-shirt gets its name from its T shape when it is layed out flat.


A good pair of scissors is important for any craft project, and cutting a T-shirt neck is no exception. Look for a pair of sharp, durable scissors that will make clean cuts through the fabric. If you don’t have a pair of regular scissors, you can use a rotary cutter with a cutting mat.

Cutting the Neck of a T-Shirt

A T-shirt neckline can sometimes be too wide or low-cut for your liking. If you want to change the neckline of a T-shirt, it’s easy to do with a few simple cuts. With a pair of scissors, you can make a V-neck, boat neck, or scoop neck T-shirt. You can also make the neckline of a T-shirt higher or lower. Let’s get started.

Place the T-shirt on a flat surface.

To cut the neck of a T-shirt, first place the shirt on a flat surface. Fold the shirt in half so that the front and back of the shirt are touching. Then, using a sharp pair of scissors, cut along the seam at the neck of the shirt. Once you’ve cut through the seam, open up the shirt and you should have a cleanly cut neckline.

Locate the center of the T-shirt’s neckline.

T-shirts tend to stretch out of shape around the neckline, so it’s a good idea to give it a little refresh. This doesn’t have to be an expensive project — you can easily do it at home with a few simple supplies. And, best of all, it only takes a few minutes!

Here’s what you’ll need:
-A T-shirt
-A sharp pair of scissors
-A ruler or a tape measure

First, locate the center of the T-shirt’s neckline. You can do this by folding the shirt in half and finding the spot where the two shoulder seams meet. Once you’ve found the center, use a pen or a piece of chalk to mark it with a small dot.

Place the scissors at the center of the neckline.

Now that you’ve found the center of the neckline, it’s time to cut. Place the scissors at the center of the neckline and cut outward towards one of the sleeves. Be sure to cut slowly and evenly. Repeat on the other side.

Cut outward from the center of the neckline.

Once you have your T-shirt laid out in front of you, grab a sharp pair of scissors and cut outward from the center of the neckline. You’ll want to make sure that your cuts are even, so take your time with this step. If you want, you can use a ruler or a fabric pencil to mark a line before you start cutting

After you’ve made your initial cuts, try the shirt on to see how it looks. If you’re happy with the neckline, move on to the next step. If not, make any adjustments that you feel are necessary.

Once you’re happy with the neckline, finish cutting the rest of the way around the shirt. Once you’re done, you can optionally add some fringe or other decorative details if you’d like.

Continue cutting until you reach the desired neckline.

Now that you’ve cut off the bottom hem of your shirt, it’s time to move on to the neckline. Unless you want a scoop neck, you’ll need to cut off the collar of your shirt as well. Doing this is easy, but it will take a little bit of time if you want a precise neckline.

To start, put on your T-shirt and mark where you want the new neckline to fall with a piece of chalk or a fabric pen. Then, remove the shirt and lay it flat on a cutting surface.

Next, use scissors or a rotary cutter to cut along the line you marked. Start at one end of the neckline and cut slowly and carefully until you reach the other end. If you’re using scissors, make sure to snip away any loose threads so they don’t get tangled up.

Once you’ve cut all the way around, try on your shirt again to see how it looks. If you’re happy with the results, congratulations! You’ve successfully cut the neck of a T-shirt.

Finishing the Neckline

A t-shirt’s neckline can often be the most difficult part of the shirt to cut. There are a few different ways to cut a t-shirt neck, and the method you choose will depend on the look you’re going for. Let’s get into the details.

Try the T-shirt on to check the neckline.

If you want to keep the same neckline but just clean it up a bit, put on the shirt and look in the mirror. Decide how much you want to take off. Then, using a fabric marker, draw a line around the neckline where you want to cut. Take the shirt off and cut along the line.

Trim the neckline as needed.

Finish the neckline by trimming any excess fabric. Use a rotary cutter or sharp scissors to trim the neckline, being careful not to cut into the stitches. If you are using a rotary cutter, be sure to use a cutting mat to protect your surface. Cut away any loose threads and you’re finished!

Wear the T-shirt.

Using a T-shirt that you already own and wear often is the best way to ensure an accurate neckline. If you do not have an existing T-shirt, put on a crew neck shirt that fits you well.

Fold the T-shirt in half lengthwise so that the shoulder seams line up. Smooth out any wrinkles.

Using a pencil or fabric marker, draw a line from the shoulder seam down to the center of your neck. This will be your guide line for cutting the new neckline.

Cut along the guide line, being careful not to cut too close to the edge. You can always trim off more later if necessary.

Cut a small slit in the center of the neckline, being careful not to cut too far down. This will help you try on the shirt and adjust the neckline as needed.

Slip the shirt over your head and assess how much further you need to cut the neckline. When you are happy with how it looks, trim off any excess fabric and remove any loose threads.