If you’re looking for the answer to this question, you’ve come to the right place. In this blog post, we’ll tell you everything you need to know about finding the right size screws for 5/8 drywall.
Checkout this video:
Introduction
Drywall is a material used in construction for the finishing of walls and ceilings. It is made of a gypsum board that is pressed between two thick sheets of paper. Drywall screws are used to attach the drywall to the studs in the wall. The type of screw you use will depend on the thickness of the drywall.
What Size Screws Do I Need for 5/8 Drywall?
6d Common Nails
The 6d common nail is used for attaching 1/2-inch and 5/8-inch drywall to wood framing. The 6d common nail can also be used to attach metal furring strips to wood framing.
8d Common Nails
For 5/8-inch drywall, you want to use 8d common nails. These are nails that are 3 1/2 inches long. You should be able to find them at any hardware store or home center.
8d Galvanized Box Nails
If you’re installing 5/8-inch drywall over wood framing, the most common type of fastener to use is an 8d galvanized box nail. This size of nail is also commonly used for attaching wood furring strips to concrete walls. The “d” designation in 8d means that the nail is driven through 5/8-inch drywall and into the wood framing behind it to a depth of 1 1/4 inches.
10d Common Nails
10d common nails are used for attaching 1/2-inch and 5/8-inch drywall sheets to wood studs. The diameter of the nail is 0.148 inches (3.8 mm) and the length is 3 1/4 inches (82.6 mm).
10d Galvanized Box Nails
If you’re planning to use 10d galvanized box nails to fasten 5/8-inch drywall to wood framing, there are a few things you should know. For one, these nails are not actually screws. As such, they are not as strong as screws and will not provide the same level of holding power. Additionally, because they are made of steel, they are not as corrosion-resistant as stainless steel screws.
Conclusion
In conclusion, you will need #8 x 2-1/2″ screws for 5/8″ drywall.
