If you’re wondering what size jack you need for your car, you’re in the right place. In this blog post, we’ll go over the different types of jacks available and what size you’ll need for your car.
Checkout this video:
Jacks
Jacks come in different sizes and weights. The size of the jack you need for your car depends on the make, model, and year of your car. You will also need to take into account the weight of your car.
Floor Jacks
Floor jacks are the most common type of jack and are typically used to lift the front or rear end of a car in order to change a tire. They come in a variety of sizes, from 3 tons all the way up to 20 tons. The most common size for floor jacks is a 3 ton jack, but it’s always best to check your car’s owner’s manual to see what size jack is recommended.
Floor jacks can be either hydraulic or mechanical. Hydraulic jacks use a pump to raise the car, while mechanical jacks use a ratchet system. Hydraulic jacks are generally more expensive than mechanical jacks, but they are also much easier to use.
When choosing a floor jack, be sure to choose one that is durable and has a large lifting capacity. You should also make sure that the jack you choose is low profile so that it can fit under your car without scraping the ground.
Bottle Jacks
A bottle jack is a hydraulic jack that uses a cylinder and piston to raise vehicles. They are generally small and compact, making them easy to store in your trunk or garage. These jacks are ideal for lifting cars with low ground clearance, as they can be placed under the vehicle without needing a lot of extra space. Bottle jacks are also less likely to damage your car’s frame than other types of jacks.
Scissor Jacks
Scissor jacks are the most common type of jack included with a new car. They’re also inexpensive and easy to find at your local auto parts store. Scissor jacks are designed to lift one end of your car at a time, so you’ll need to use two if you want to change a tire on the side of the road. They’re not as stable as floor jacks, so be careful when using them on uneven surfaces.
How to Measure for the Correct Jack Size
One of the worst things that can happen while you’re out on the open road is a flat tire. And, if you don’t have a jack or the correct size jack for your car, you could be in for a long walk. In this article, we’ll show you how to measure for the correct size jack for your car.
Length
To measure for the correct length, start at the control panel where the jack handle is mounted. Measure to the center of the jack pad on the lifting arm. This dimension is known as the stroke length. The jack handle must be long enough to reach this point with room to spare. If it doesn’t, you need a longer handle.
Width
To start, you need to know the width of your car. You can measure this yourself or look up the specifications for your vehicle online. Once you have the width, you can begin to narrow down your choices for jacks.
If you are looking for a jack to use for general maintenance on your car, a 2-ton jack should be sufficient. However, if you are looking for a jack to use for tire changes or other situations where you will need to lift the entire car, you will need a 3-ton jack.
Height
Most jacks are designed to be used with a variety of vehicle heights, so it’s important that you know how to measure for the correct jack size. The first step is to find the ground clearance of your vehicle. This is the distance between the ground and the lowest point on your vehicle. You can find this measurement in your owner’s manual or by measuring from the ground to the bottom of your car’s frame.
Once you have the ground clearance measurement, you need to determine the jack height. To do this, measure from the ground to the lowest point on your vehicle that you need to lift. For example, if you are changing a tire, you would measure from the ground to the top of the wheel.
Now that you have both measurements, you can select a jack that has a maximum height that is equal to or greater than the measurement of your vehicle’s height.
Conclusion
Size really does matter when it comes to jacks. You need to make sure you have a jack that is big enough and strong enough to lift your car. If you don’t, you could end up doing some serious damage to your car – or worse, yourself.
So, what size jack do you need for your car? It depends on the make and model of your car, as well as its weight. A good rule of thumb is to choose a jack that can lift at least 1.5 times the weight of your car.
If you’re not sure what size jack to get, or if you need help choosing the right one for your car, ask a professional at your local auto parts store. They’ll be able to help you find the perfect jack for your needs.