What size are license plate screws? This is a question that we get asked a lot. In this blog post, we’ll answer that question and give you some tips on how to choose the right size screws for your license plate.
Checkout this video:
Standard Sizes for License Plate Screws
Most license plate screws are going to be between a quarter of an inch and a half an inch in diameter. The most common size that you’re going to see is going to be a quarter of an inch, but a lot of times you will see a half an inch. They’re going to be either Phillips head screws or they’re going to be hex head screws.
M6 x 1.0
M6 x 1.0 screws are the most common size for license plate fasteners. M6 refers to a metric 6mm diameter, and 1.0 refers to 1.0mm spacing between the threads. This is slightly different from a standard (inch) screw, which would be called 6-32 x 1″. The difference is that the metric thread spacing is a bit more fine, so an M6 screw can’t be used in place of a standard 6-32 screw.
M8 x 1.25
The M8 x 1.25 size screws are the most common size used for license plate attachments. However, depending on the make, model, and year of your vehicle, you may need a different size. It is best to check with your vehicle’s manufacturer to determine the correct screw size for your application.
The thread pitch of an M8 screw is 1.25 mm. This means that there are 1.25 mm between each thread on the screw. The M8 designation represents the outer diameter of the screws shank, which is 8 mm.
Lengths of License Plate Screws
There are a few different lengths of screws that can be used for license plates: 3/4″, 1″, 1-1/4″, 1-1/2″, and 1-3/4″. The most common size is 1″, but it really depends on the thickness of the license plate and the frame. If you are unsure, it is always best to err on the side of longer screws so that they can be trimmed down if needed.
12mm
At 12mm, these screws are just long enough to securely affix your license plate without protruding too far and becoming susceptible to bending or breaking.
16mm
16mm Metric License Plate Screws are commonly used to secure license plates on German Cars. The common thread pitch is 1.5mm. We also offer a matching 16mm nut for this screw.
Types of License Plate Screws
There are three types of license plate screws: standard, metric, and metric stud. The standard license plate screw is a #8-32 UNC. The metric license plate screw is a M4 x .7 x 10. The metric stud is a M6 x 1.0 x 16.
Button Head
Button head screws have a round, flat head with a small cylindrical extension (the “button”) rising from the center. They are designed so that the button is flush with or below the surface of the material being fastened. This makes them ideal for applications where a smooth, finished look is desired, such as in laptop computers or cell phones. Button head screws are also known as “flush head screws.”
Flat Head
Flat head screws are the most common type of screws used to secure license plates. The head of the screw is flush with the surface of the plate, making it less likely to catch on clothing or other objects. These screws are available in a variety of lengths and widths to accommodate different plate thicknesses.
How to Choose the Right Size and Length of License Plate Screw
You need to make sure you have the right size and length of license plate screws when you are fixing your license plate onto your car. The length of the screws should be no more than 1/4 inch so that they do not protrude from the back of the license plate and cause damage. The size of the screws should be 3/8 inch or smaller so that they are not too big and visible.
Consider the application
Before deciding on the size and length of the license plate screw, it’s important to first consider the application. Will the screw be used indoors or outdoors? If outdoors, what is the expected weather conditions?
Are you mounting the license plate to a car, truck, trailer, or other vehicle? The weight of the vehicle will also play a role in choosing the right size and length screw.
##In conclusion,
It’s important to consider the application before deciding on the size and length of license plate screw. Will the screw be used indoors or outdoors? If outdoors, what is the expected weather conditions? Are you mounting the license plate to a car, truck, trailer, or other vehicle? The weight of the vehicle will also play a role in choosing the right size and length screw.
Check the vehicle’s owner’s manual
The size and length of the screws you’ll need to attach your license plate will depend on your vehicle. The best way to determine what size and length screws you need is to check your vehicle’s owner’s manual.
If you don’t have your owner’s manual, you can usually find the information you need by doing a quick online search for your vehicle’s make and model. Once you know the size and length of screws you need, be sure to buy screws that are made from high-quality materials like stainless steel or zinc-coated steel to prevent rusting.
