If you’re wondering what size allen wrench you need for your Moen shower handle, you’re in the right place. In this blog post, we’ll walk you through the steps to finding the right size wrench for your shower handle. By following these simple steps, you’ll be able to find the right size allen wrench for your Moen shower handle in no time.
Checkout this video:
The Different Types of Allen Wrenches
Allen wrenches, or hex keys, come in a variety of sizes and can be used for a variety of tasks. The size of the wrench you need will depend on the job you’re doing. For example, a small wrench is typically used for smaller jobs, while a larger wrench is needed for larger projects.
Standard Allen Wrenches
Allen wrenches, also called hex keys, are L-shaped tools used to drive bolts and screws with a hexagonal (six-sided) socket. The hexagonal socket is also known as an internal hexagon socket or an internal hex drive. Allen wrenches come in different sizes, based on the width of the wrench’s short arm and the length of its long arm. The sizes are usually expressed in millimeters (mm).
The most common sizes of standard Allen wrenches are:
-2 mm
-2.5 mm
-3 mm
-4 mm
-5 mm
-6 mm
-8 mm
Metric Allen Wrenches
Metric Allen wrenches are the most common type of Allen wrench. They are used in a variety of settings, from home improvement projects to automotive repair. Metric Allen wrenches are available in a range of sizes, from small to large. The size you need will depend on the project you are working on.
Small metric Allen wrenches are typically used for delicate projects, such as electronic repairs. Large metric Allen wrenches are often used for automotive and construction projects.
There is no standard length for metric Allen wrenches; they come in a range of lengths, from short to long. The length you need will depend on the project you are working on.
Torx Wrenches
Torx wrenches are T-shaped with a six-pointed star pattern. The size of the wrench is determined by the distance across the flats of the wrench. Torx wrenches are often used in place of hex wrenches because they can apply more torque to a fastener without stripping it. Torx wrenches are available in sizes T10 through T50.
How to Measure the Size of an Allen Wrench
In order to find the right size Allen wrench for your Moen shower handle, you will need to know the measurement of the hole in the center of the handle. The hole in the center of the handle is where the Allen wrench will be inserted. You will need to measure the width and the length of the hole in order to find the right size Allen wrench for your Moen shower handle.
Determining the Size of a Standard Allen Wrench
The size of a standard Allen wrench is determined by the distance, in inches or millimeters, between the opposite flat sides of the wrench. This measurement is known as the wrench’s “flat-to-flat” dimension.
To measure the size of a standard Allen wrench, first locate one of the wrench’s flat sides. Place a ruler or tape measure against this side, making sure that the ruler or tape measure is parallel to the flats of the wrench. Next, use a pencil or pen to mark the point on the ruler or tape measure where the other flat side of the wrench lines up. Finally, measure the distance between your two marks to determine the wrench’s flat-to-flat dimension.
Determining the Size of a Metric Allen Wrench
When determining the size of a metric Allen wrench, it is important to know that there are two different types of metric wrench measurements. The first type of measurement is the actual size of the wrench, and the second type is the dimension across flats, which is a measurement of the distance between opposite sides of the wrench opening. Determining which measurement you need depends on what you will be using the wrench for.
To measure the size of a metric Allen wrench, you will need:
-A ruler or tape measure
-A pencil
-Paper
Instructions:
1. Place the ruler or tape measure along one side of the hexagonal opening at the end of the wrench.
2. Note the measurement in millimeters (mm). This is the actual size of the wrench.
3. To determine the dimension across flats (D), measure the distance between opposite flats on the wrench opening. This is also measured in millimeters (mm).
4. Use these two measurements to determine which size metric Allen wrench you need for your project.
Determining the Size of a Torx Wrench
The size of a Torx wrench is determined by the diameter of the star pattern on the head of the wrench. To measure the size of a Torx wrench, first determine the diameter of one of the star points. This can be done with a ruler or a caliper. Once the diameter has been determined, consult a chart to find the corresponding Torx wrench size.
When measuring the diameter of a Torx wrench, it is important to use a ruler or caliper that is accurately calibrated. Otherwise, the measurements may not be accurate, and this could lead to selecting the wrong size wrench for the job. In general, it is always better to err on the side of selecting a larger wrench than one that is too small.
How to Use an Allen Wrench
An Allen wrench is a hexagonal-shaped wrench that is used to loosen or tighten screws and bolts that have a hexagonal socket. Moen shower handles have a hexagonal socket, so you will need an Allen wrench to remove or tighten the handle. The size of the Allen wrench you need will depend on the size of the hexagonal socket on the handle.
Inserting the Wrench Into the Screw
First, check the size of your shower handle’s screw. You will need an Allen wrench that is slightly smaller than the width of the screw. Insert the L-shaped end of the wrench into the hole in the center of the screw. The long part of the wrench should be pointing away from you, and perpendicular to the handle.
Turning the Wrench
To use an Allen wrench, start by finding the right size wrench for the job. Then, insert the short end of the wrench into the socket head and turn clockwise to tighten or counterclockwise to loosen. For a tight fit, you may need to use an extension bar or cheater bar to give you more leverage.
Removing the Wrench From the Screw
To remove the wrench from the screw, hold the wrench with the jaws open. Place your thumb on top of the wrench and your firstfinger on the bottom. Press the jaws of the wrench together with your thumb while squeezing the bottom of the wrench with your first finger. This will release the jaws from the screw.
