How to Preserve Funeral Flowers in Resin

Learn how to preserve your funeral flowers in resin so you can keep them as a memento for years to come.

Checkout this video:

Introduction

When a loved one passes away, it can be difficult to let go of physical reminders of their life, like funeral flowers. However, preserving funeral flowers in resin is a great way to create a lasting memory of your loved one that you can display in your home.

Resin is a substance that hardens when exposed to air, and it can be used to preserve a wide variety of items, including flowers. To preserve funeral flowers in resin, you will need to purchase a resin kit from a craft store, as well as some other supplies. The steps below will walk you through the process of preserving your flowers in resin.

What You’ll Need

-Dried flowers
-Resin
-Mixing cup
-Stir stick
-Cookie sheet
-Tape (optional)
-Gloves (optional)
-Pourable backing (optional)

Step One: Preparing the Flowers

The first step in preserving funeral flowers in resin is to prepare the flowers. You will need to remove all of the leaves and any excess greenery from the stems. Cut the stems down to about 2 inches in length. If you are using a vase, you will need to cut the stems even shorter.

Once the flowers are prepared, it is time to start assembling them in the vase or container you have chosen. Start with the larger blooms and fill in around them with the smaller flowers. You can add greenery if you like, but be sure to keep it away from the edges of the container so that it does not come into contact with the resin.

Step Two: Mixing the Resin

Once you have gathered your supplies, you will need to mix the resin according to the manufacturer’s instructions. This usually involves combining equal parts of two different liquids. Be sure to mix the resin thoroughly, as any clumps will show up in the final product.

Next, you will need to add color to the resin. You can use liquid food coloring, gel food coloring, or even powdered pigments. Again, mix thoroughly to avoid any streaks or clumps in the final product.

Once you have mixed the resin and coloring together, it is time to add the flowers. You can add as many or as few flowers as you like, depending on the effect you are going for. Be sure to arrange the flowers in the mold before adding the resin, as they will not move once they are in place.

Finally, pour the resin into the mold, being careful not to disturb the arrangement of the flowers. Allow the resin to set according to the manufacturer’s instructions before removing it from the mold.

Step Three: Pouring the Resin

The final step in preserving your funeral flowers in resin is to pour the resin. You will want to pour the resin slowly and carefully so that it does not disturb the flowers. Once the resin is poured, you will want to allow it to cure for 24 hours. After it has cured, you can then enjoy your beautiful and unique preserved flowers

Step Four: Curing the Resin

Once you have placed your flowers in the resin, you will need to cure the resin in order to preserve your flowers. The curing process can take anywhere from 24 to 48 hours, and during this time the resin will harden and your flowers will be preserved.

Step Five: Finishing Touches

After the resin has completely cured, you can add any final touches to your memorial piece. You may want to glue on a photo or other memento, or add some decorative elements like beads or glitter. Once you’re satisfied with your design, your funeral flowers will be preserved forever in a beautiful and unique way.

Tips and Tricks

When it comes to preserving funeral flowers in resin, there are a few things you need to know to get the best results. Here are some tips and tricks to help you preserve your flowers in resin:

– Choose the right flowers: Funeral flowers are often large and lush, which can make them difficult to preserve in resin. Avoid using flowers with a lot of petals, and opt for smaller, simpler blooms instead.
– Prep your flowers: Before you start working with your flowers, it’s important to prep them properly. Trim off any excess foliage, and remove any pollen from the petals.
– Work in small batches: It’s best to work with a small amount of flowers at a time so that they don’t wilt before you have a chance to preserved them.
– Use a Flower Former: A flower former is a great way to keep your flowers in place while they dry. Simply place the former over the flower, and let it dry overnight.
– Be patient: Preserving funeral flowers in resin can be a time-consuming process, but it’s important to be patient. Allow each layer of resin to dry completely before adding the next layer.

FAQs

Learn the basics of how to preserve funeral flowers in resin with this quick FAQ guide.

Q: What type of resin should I use?

A: There are two main types of resin that can be used for this purpose: epoxy and polyurethane. Epoxy is generally more expensive but it is also more durable and provides a clearer finish. Polyurethane is less expensive and not as durable, but it is easier to work with.

Q: What other supplies will I need?

A: In addition to the resin, you will need molding materials (such as silicone molds), gloves, mixing cups, stirring sticks, and disposable cups or trays to catch any drips. You may also want to use a hair dryer to speed up the curing process.

Q: How do I preserve the flowers?

A: The first step is to remove as much moisture from the flowers as possible. This can be done by placing them in a dehydrator or oven set on the lowest possible setting until they are dry to the touch. Once they are dry, carefully place them in the molding materials.

Q: How do I mix the resin?

A: The exact mixing ratio will vary depending on the type of resin you are using, so be sure to consult the instructions that come with your resin. In general, you will mix equal parts of the resin and hardener together until they are thoroughly combined.

Q: How do I apply the resin?

A: Once the resin is mixed, you will need to work quickly before it starts to harden. Pour it over the flowers in the molding material, using enough to completely cover them. Be sure to work in a well-ventilated area and use gloves to protect your hands from accidental skin contact with the resin.

Q: How long does it take for the resin to harden?

A: Again, this will vary depending on the type of resin you are using and can range from a few hours to overnight. You can speed up the process by using a hair dryer set on low heat. Once it is hardened, remove it from the molding materials and enjoy your beautiful preserved flowers!

Conclusion

To conclude, preserving funeral flowers in resin is a great way to keep them looking beautiful for years to come. The process is relatively simple and doesn’t require any special equipment. All you need is a plastic bucket, some food-grade silicone, and a little bit of patience. The finished product will be a beautiful, unique piece that you can cherish forever.