How to cut a cigar – There are a few different ways to cut a cigar, and the method you choose depends on the type of cigar you’re smoking.
Checkout this video:
Introduction
Cigars are often enjoyed by aficionados and first-timers alike. There are many ways to cut a cigar, but the most important thing is to find a method that works well for you and results in a comfortable smoke. In this guide, we’ll cover some of the most popular methods for cutting cigars.
The Tools You’ll Need
In order to cut a cigar, you will need a sharp cutting instrument and something to catch the tobacco. A knife or scissors can be used to make a clean cut, but many people prefer to use a cigar cutter. There are many different types of cigar cutters available, but they all have one goal – to make a clean, precise cut.
Most cigars have a cap that needs to be removed before smoking. The cap is usually located at the head of the cigar, and it is glued or taped in place. Cutters usually have two circular blades that come together in a single handle. To use a cutter, you simply place the head of the cigar in the opening and squeeze the handles together. This will cause the blades to come together and make a clean cut through the cap.
Some cigars, known as figurados, have an irregular shape and require special cutting instruments. These cigars often have a tapered head that needs to be cut at an angle in order to smoke them properly. For these cigars, you will need either a v-cutter or a punch cutter.
A v-cutter makes a V-shaped notch in the head of the cigar. This type of cut allows for more air flow and can help create a smoother draw. To use a v-cutter, simply place the head of the cigar in the opening and close it like you would with any other type of cutter.
A punch cutter is similar to a v-cutter, but it makes a small hole instead of notch. This type of cutter can be helpful if you find that v-cuts are making your cigars too airy. To use this type of cutter, simply twist it into the head of the cigar until it punctures through to create a small hole.
The Cutting Process
Cutting a cigar is a simple process, but it’s one that you need to take seriously. A bad cut can ruin a good cigar, so it’s important to know how to do it properly.
There are two types of cuts that you can make: a guillotine cut and a V-cut. Guillotine cuts are the most popular, and they’re also the easiest to do. Simply put the blade of your cutter against the head of the cigar and slice it off cleanly.
V-cuts are a bit more difficult, but they’re also much cleaner. To make a V-cut, simply place the cutter at an angle against the head of the cigar and slice into it. The goal is to create a small V-shaped notch in the cigar that will allow you to draw smoke without damaging the wrapper.
The Lighting Process
Cigar smoking is often compared to wine tasting, and for good reason. Just as with wine, the cigar smoking experience is greatly affected by how the cigar is cut and lit. A bad cut or poor lighting technique can ruin even the finest cigar.
The best way to light a cigar is slowly and evenly, using a butane lighter or long wooden match. Hold the flame an inch or so away from the cigar, rotating it as you light so that the entire circumference of the cigar’s foot is evenly lit. Once lit, take a few draws on the cigar to ensure that it’s burning evenly, then gently blow on the lit end to remove any lingering bits of tobacco.
Enjoying Your Cigar
Now that you have your cigar, it’s time to enjoy it! The first step is to cut the cigar. You want to cut the cigar so that the smoke is smooth and not harsh. There are a few ways to do this, but the most important thing is to not cut too much off the cigar. If you cut too much, the cigar will unravel and be ruined.
Here are a few ways to cut your cigar:
– Use a sharp knife or razor blade to cut a straight line across the top of the cigar.
– Use a guillotine cutter to make a clean, straight cut.
– Use a V-cutter to make a V-shaped notch in the top of the cigar. This type of cutter allows you to control how much of thecigar ’re cutting off.
Once you’ve made your cut, it’s time to light your cigar. You want to use a butane lighter or wooden match to light your cigar. Hold the flame about an inch away from the end of the cigar and rotate thecigar as you light it. Once it’s lit, take a few puffs and enjoy!
