How to Preserve Flowers in Liquid

This blog post will show you how to preserve flowers in liquid, keeping them beautiful for longer. We’ll go over the supplies you’ll need and the steps to take to get the best results.

How to <a href=''                                  style=preserve flowers in Liquid” src=”” style=”display:none”>Checkout this video:


Flowers are beautiful, delicate things that add color and life to any room. They’re also notoriously difficult to keep alive for more than a few days. If you want to enjoy the beauty of fresh flowers without the hassle of daily maintenance, one solution is to preserve them in liquid. This will keep them looking fresh for weeks or even months, and it’s a relatively simple process.

What You’ll Need

-A clean, empty jar or vase
-A sharp knife or scissors
-A packet of silica gel crystals
-Fresh flowers

To preserve your flowers in liquid, you will need a clean, empty jar or vase, a sharp knife or scissors, and a packet of Silica gel crystals. Fresh flowers are best, but you can also use flowers that have been carefully air dried.

Cut the stems of your flowers to the desired length and place them in the jar or vase. Fill the jar or vase with enough water to completely cover the stems. Add the Silica gel crystals to the water according to the package directions. Place the jar or vase in a cool, dark place and allow the flowers to steep for at least two weeks. After two weeks, remove the flowers from the water and enjoy them as an everlasting memento of a special occasion.

The Process

There are a few different ways to preserve flowers in liquid, but the process is generally the same. You will need to start with fresh flowers that have been recently cut. It is important to use a sharp knife or pruning shears to make a clean cut on the stem at an angle. This will help the flower absorb more water and keep it fresh for longer.

Next, you will need to place the flowers in a container of lukewarm water mixed with a preservative solution. You can find these solutions at your local florist or craft store. Allow the flowers to sit in the solution for at least 12 hours, or overnight if possible.

Once the flowers have had time to soak, you can remove them from the solution and gently pat them dry with a soft cloth. Place the flowers in a container of clean, cool water and store them in a cool, dark place until you are ready to use them.

Tips and Tricks

To give your flowers the best chance of survival, start with fresh blooms. Cut them just before you plan on adding them to the resin and make sure to remove any leaves that will be below the waterline.

It’s also important to sterilize your vase or container before adding the flowers. You can do this by boiling it for a few minutes or soaking it in a bleach solution.

If you’re using real flowers, you’ll need to coats them in a clear sealant before submerging them in the resin. This will help to prevent air bubbles from forming around the flowers and will give them a glossy finish. There are many clear sealants on the market, but we recommend using one specifically designed for use with resin.

Once your flowers are ready, mix equal parts of the resin and hardener according to the manufacturer’s instructions. Stir slowly and carefully to avoid creating air bubbles. If necessary, use a Heat Gun to remove any bubbles that appear on the surface of the mixture.

Next, slowly pour the resin mixture into your container, being careful not to disturb the flowers. Gently tap the side of the container to help release any air bubbles that may have formed. Allow the resin to cure for at least 24 hours before displaying your arrangement.


-Can I use any flowers?
-What kind of container should I use?
-How do I change the water?
-Should I add anything to the water?

Q: Can I use any flowers?
A: Yes, you can use any type of flower, but avoid using flowers with a lot of pollen as this can cause the liquid to become cloudy. If you are using a light colored flower, you may want to consider adding a drop or two of food coloring to the water to help offset any color loss that may occur during the preservation process.

Q: What kind of container should I use?
A: A clear glass or plastic container is ideal so that you can see the flowers as they preserve. The container should have a tight fitting lid to prevent evaporation.

Q: How do I change the water?
A: You will need to change the water every few days to prevent the growth of bacteria. Be sure to remove all of the old water before adding fresh water. Adding a small amount of bleach to the fresh water can help disinfect the container and extend the life of your preserved flowers.

Q: Should I add anything to the water?
A: You can add a small amount of sugar, salt, or glycerin to help preserve the flowers, but this is not necessary.

Flower Preserving in Action

Here are some tips to help you get started withflower preserving in liquid:
-Start with fresh flowers that have not been treated with pesticides.
-Choose a flowers that are not wilted and have not begun to fade.
-Add one teaspoon of bleach per quart of water to prevent the growth of bacteria.
– Flowers with a lot of pollen, such as daisies, will lose their color when submerged in water. To prevent this, remove the petals before submerging the flower in the liquid.
– Using a sharp knife, make a clean cut at the base of the stem before submerging the flower in the liquid.

More Ideas

Some people like to use hairspray, but it is not as effective as glycerin. You can add a drop or two of essential oil to the water for fragrance if you like. You can also add a tablespoon of sugar to the water. This helps the flowers absorb more liquid and makes them last longer.

Wrapping It Up

Once you have your flowers prepared, it is time to think about how you will store them. The most important thing to remember is that Flowers need to be kept in a cool, dark place. sunlight and heat will cause the flowers to fade quickly.

You will also need to make sure that the container you are using is airtight. You can use a variety of different containers, but mason jars work well because they can be sealed tightly. Be sure to leave an inch or two of headspace at the top of the jar so that the flowers have room to move around.

Once your flowers are in the container, add enough liquid to cover them completely. You can use water, but glycerin works well because it helps preserve the color of the flowers. If you are using water, you can add a few drops of bleach to help prevent bacteria from growing.

Seal your container and store it in a cool, dark place. Check on your flowers every few days and add more liquid if necessary. Your flowers should last for several weeks using this method.

Further Reading

If you are interested in learning more about how to preserve flowers in liquid, here are some additional resources that may be of help:

-The Library of Congress has an article on the subject which can be found here:

-The University of Illinois offers a course on how to preserve flowers, which you can find here:

-Kodak has an article with tips on how to take better photographs of flowers:


The process of preserving flowers in liquid is a centuries-old art that has been used to preserve both the beauty and the meaning of plants and flowers. When done correctly, this process can enable you to keep your flowers for months or even years. Here are the steps you need to take to preserve your flowers in liquid.

1. Choose the right type of flower. The best types of flowers for preservation are those that are flat, have minimal petals, and are not too fragrant. Some good choices include roses, carnations, daisies, and Chrysanthemums. Avoid using lilies, tulips, and other Types of Flowers that have a lot of nectar as this can make them rot quickly.

2. Pick your flowers at the right time. The best time to pick flowers for preservation is when they are just beginning to open up. This way, they will still be fairly strong and won’t have started to wilt yet.

3.Prepare your tools and materials. You will need a sharp knife, a pair of scissors, a clean glass jar or vase, some silica gel (you can find this at most craft stores), and a flower preservative solution (You can make your own with one part sugar and two parts water).

4. Trim your flower stems. Using your sharp knife or scissors, cut the stems of your flowers at an angle so that they will be able to drink up more water easily. Make sure to remove any leaves that will be below the waterline as these will decompose quickly and contaminate your flower preservative solution.

5. Fill your jar or vase with silica gel until it is about 2/3rds full then pour in enough of your flower preservative solution to completely cover the silica gel (this helps keeps air bubbles from forming around your flowers which can cause them to rot). Place your trimmed flower stems into the jar or vase so that they are submerged in the solution then screw on the lid tightly.

6Store your jar or vase in a cool, dark place such as a cupboard or closet away from direct sunlight or heat sources as both of these can cause premature wilting