If you’re looking to add some extra flair to your home, LED strips are a great way to do it. But before you start cutting and installing them, there are a few things you need to know. This blog will tell you everything you need to know about cutting LED strips the right way.
Checkout this video:
Introduction
LEDs are incredibly popular for lighting these days. They’re more energy-efficient than traditional light bulbs and they last much longer too. But one potential downside of LED lighting is that it can be difficult to cut LED strips to the right size.
If you’ve ever tried to cut an LED strip light only to find that it doesn’t work properly after, you know how frustrating it can be. In this article, we’ll show you how to cut LED strips the right way so that you can get the perfect fit for your lighting project.
Tools You Will Need
Before we get started on how to cut LED strips, here are the tools you will need:
– LED Strip Lights
– A sharp knife
– A cutting board or other protective surface
– Measuring tape or a ruler
With these tools in hand, you are now ready to learn how to cut LED strips.
Cutting Your LED Strip
Whether you’re looking to add some accent lighting to your kitchen or you want to put in some under-cabinet lighting, LED strips are a great option. But before you can enjoy the benefits of your new LED lights, you need to know how to cut them.
Fortunately, cutting LED strips is a relatively easy process. Just follow these simple steps and you’ll be ready to go in no time.
First, you’ll need to identify the cutting mark on your LED strip. These marks are usually indicated by a small line or dot on the strip itself. Once you’ve located the cutting mark, use a sharp pair of scissors or a knife to carefully cut along the line.
Next, peel back the protective coating on the strip until you reach the exposed LEDs. Be careful not to touch the LEDs themselves, as this can damage them.
Now that the LEDs are exposed, use a soldering iron to connect the two stripped ends of the wire together. This will allow current to flow through the cut section of the strip so that your lights will still work properly.
Once you’ve made your connection, re-attach the protective coating and turn on your lights to test them out. If everything is working properly, congratulations! You’ve successfully cut your LED strip lights.
Fixing Your LED Strip
If you’ve cut your LED strip in the wrong place, or damaged it during installation, there’s no need to worry. With a little bit of effort, you can fix your LED strip and get it working again.
1) Start by finding the damaged section of your LED strip. If the damage is severe, you may need to cut out the damaged section and replace it with a new piece of strip.
2) If the damage is less severe, you can try soldering the broken connection back together. This may be tricky, so take your time and be careful not to further damage the strip.
3) Once you’ve repaired the broken connection, apply some heat shrink tubing over top to insulate and protect the repair.
4) Finally, re-attach your LED strip (be sure to use double-sided tape or adhesive backing) and test it to make sure it’s working properly.
Conclusion
In conclusion, there are a few things to keep in mind when cutting LED strips. Make sure you have the right tools for the job, use a clean surface, and be precise with your cuts. With a little practice, you’ll be able to cut LED strips like a pro!
