Are you thinking about painting your bathroom shower tile? If so, you’ll want to read this blog post first! We’ll go over the pros and cons of painting shower tile, and give you some tips to make sure the job is done right.
Checkout this video:
Introduction
Bathroom tile is one of those necessary features in a bathroom that can be both utilitarian and decorative. Whether your tile is outdated or you simply want a change, painting your tile is an inexpensive way to give your bathroom a new look. But before you start painting, there are a few things you should know about painting bathroom tile.
What You Need to Know About Painting Shower Tiles
Painting shower tiles can be a great way to update your bathroom without spending a lot of money. You can use a special shower tile paint to get the job done. However, there are a few things you need to know before you start painting. This article will give you all the information you need to know about painting shower tiles.
The Right Paint
Not all paint is created equal, and that’s especially true when you’re looking for the best paint for painting shower tiles. You need a paint that is made specifically for using in bathrooms and will stand up to the high humidity and moisture that are typical in this room.
Bathroom-specific paints are usually either epoxy-based or urethane-acrylic. Epoxy-based paints have a stronger adhesion and durability, but they can yellow over time. Urethane-acrylics are more resistant to yellowing, but they don’t adhere quite as well to surfaces like tile.
You’ll also want to make sure you get a paint that is mold and mildew resistant, since these are common problems in bathrooms.
The Right Preparation
Thoroughly clean the shower tile and let it dry completely. Fill any holes or cracks with caulking or epoxy putty, and let that dry as well. Apply painter’s tape to any areas you don’t want to paint, such as around the shower head or tub fixtures.
If the tile is glossy, sand it lightly with fine-grit sandpaper to dull the finish. Wipe off any dust with a damp cloth.
Now you’re ready to prime the tile. Use a brush designed for use with latex paint to avoid chipping, and work in small sections so the primer doesn’t have a chance to dry before you’re done. Let the primer dry completely before painting.
How to Paint Shower Tiles
Bathroom shower tile can be painted, but there are a few things you need to do first in order to ensure that the paint will adhere properly and that the tile won’t be damaged. You’ll need to clean the tile thoroughly, etch the surface, and then apply a primer and paint designed for tile. Keep reading to learn more about how to paint shower tiles.
Step One: Prepare the Surface
The first step to painting your shower tiles is to prepare the surface. This means that you need to clean the tiles thoroughly and remove any old paint or sealant. You may also need to sand the surface of the tiles to rough them up a bit and help the new paint adhere.
Step Two: Prime the Surface
The next step is to prime the surface you’ll be painting. This is a very important step because it will help the paint to adhere better and create a more durable finish. You can use a primer made specifically for tiles or you can use a multi-surface primer. If you’re not sure which primer to use, ask someone at your local hardware store for guidance.
Once you’ve chosen your primer, apply it to the tile with a brush or roller and then let it dry completely. This usually takes around 24 hours.
Step Three: Paint the Tiles
Now that the grout is clean and dry, you’re ready to paint the tiles. Make sure to use a tile-specific paint so that it will adhere properly and resist mold and mildew. It’s also a good idea to use a small brush or roller specifically designed for painting tiles.
Start by painting the grout first, using a small brush to get into all the nooks and crannies. Then move on to painting the tiles themselves. Use even, consistent strokes and take your time – it might take a few coats of paint to get good coverage. Once the paint is dry, you can apply a sealer if desired.
Step Four: Seal the Painted Tiles
Once the paint is dry, you’ll need to seal it. Use a high-quality sealer made specifically for tiles, such as a clear epoxy sealer or a polyurethane sealer. Apply the sealer according to the manufacturer’s instructions, and make sure to let it dry completely before using the shower.
Conclusion
The best paint for bathroom shower tile is epoxy paint. This type of paint is designed to adhere to surfaces like tile and is waterproof once it cures. Epoxy paint can be purchased at most hardware stores and comes in a variety of colors. It’s important to follow the manufacturer’s instructions when painting shower tile, as curing times and other details will vary by brand.
