Can you paint a refrigerator? The answer may surprise you! Follow these tips and tricks to get a smooth, even finish that will last.
Checkout this video:
Introduction
You may be wondering, can you paint a refrigerator? The answer is maybe, depending on the type of refrigerator you have. If you have a stainless steel refrigerator, you may be able to paint it with the proper type of paint. However, if you have a white or black refrigerator, it is not recommended that you paint it.
What You Need
-To paint a refrigerator, you will need:
-high quality appliance paint
-paint primer
-paintbrush
-roller
-clean rag
##Heading: Preparation
##Expansion:
1. Clean the surface of the fridge with soapy water and a sponge. Rinse and dry thoroughly. If the fridge is new, clean with a degreaser to remove any residue from the manufacturing process.
2. Remove any hardware from the fridge that you don’t want to paint, such as door handles. Place these items in a plastic bag so you don’t lose them.
3. Mask off any areas of the fridge that you don’t want to paint, such as the gasket around the door. Use painter’s tape and newspapers or drop cloths to protect these areas from paint overspray.
4. Sand the surface of the fridge with medium grit sandpaper to help the paint adhere better. Wipe away any sanding dust with a damp cloth.
5
Preparation
Since most appliances are made of metal, you’ll need to use a special kind of paint that is made for metal surfaces. You can purchase this type of paint at most home improvement stores. Be sure to clean the surface of the appliance before you start painting. You may want to use a degreaser to remove any grease or dirt. Once the surface is clean and dry, you can start painting.
Painting
painting a refrigerator is not as difficult as one might think. In fact, it can be a relatively simple process that yields great results. Below are some tips on how to go about painting a refrigerator:
-Start by thoroughly cleaning the fridge with a mild soap and water solution. This will help ensure that the paint adheres properly to the surface.
-Next, sand down the fridge with a fine-grit sandpaper. This will help create a smooth surface for the paint to adhere to.
-Once the fridge is sanded, apply a primer coat of paint. This will help the paint adhere better to the fridge and also prevent it from chipping or peeling over time.
-Finally, apply a top coat of paint in the color of your choice. Allow the paint to dry completely before putting any food or beverages inside the fridge.
Finishing Up
Now that you’ve thoroughly cleaned and repaired the surface of your fridge, it’s time to give it a new coat of paint. You can use a store-bought appliance paint, or opt for a durable acrylic enamel. If you go the DIY route, make sure to sand down the fridge first and prime it with a good quality primer designed for use on appliances. Once the primer is dry, you can start painting.
Appliance paint comes in a spray can, which makes for easy application. Just make sure to do several light coats rather than one heavy coat. And be sure to let the paint dry completely between each coat. Once you’re finished painting, all you need to do is reattach any hardware (like handles) and let the fridge cure for 24 hours before plugging it back in and adding any food.
Maintaining Your Paint Job
You can maintain your paint job by regularly cleaning it with a mild soap and water solution. You should also avoid using harsh chemicals or cleaners on the fridge, as this can damage the paint.
