This step-by-step guide will show you how to cut a t-shirt into a tank top You’ll need a few supplies and a little bit of time, but the results will be worth it!
Checkout this video:
Lay the shirt out flat on a cutting surface.
Lay the shirt out flat on a cutting surface. If you don’t have a cutting surface, you can use a large cutting board or piece of cardboard. Make sure the shirt is lying as flat as possible so that you can get an even cut.
Use a ruler or a measuring tape to mark a horizontal line across the center of the shirt, about 5 inches below the armholes.
With the shirt laid flat, use a ruler or a measuring tape to mark a horizontal line across the center of the shirt, about 5 inches below the armholes. This will be the new bottom edge of your tank top.
Cut along the marked line, being careful to cut through both layers of fabric evenly. If your shirt is very stretchy, you may want to cut it a little bit larger than 5 inches so that it will still fit comfortably over your hips.
Once you have cut the bottom off of your shirt, turn it over so that the back is facing up. Make two small cuts on each side of the shirt, about 1 inch below the armhole (these will be where your new armholes will be). Then, cut along a curved line from each of these small cuts up to the existing armholes. What you should end up with is a tank top shape with two curved armhole openings.
Cut along the line you just marked.
Now that you’ve marked where you want to cut your shirt, it’s time to actually make the cut. You can use either scissors or a rotary cutter for this step. If you’re using scissors, be extra careful to cut along the line you marked so that your tank top turns out evenly. If you’re using a rotary cutter, make sure the blade is sharp so that you get a clean cut.
Once you’ve cut along the line you marked, try on your tank top to make sure it fits the way you want it to. If it’s too big or too small, you can always adjust the size by cutting more off or by stretching it out a bit. Once you’re happy with the fit, congrats! You’ve just hacked a tank top out of an old t-shirt!
Try the tank top on to make sure it fits.
Now that you have your supplies, it’s time to get started on your new tank top! First, try the tank top on to make sure it fits. If it’s too big or too small, you may need to adjust the size of your shirt. Once you have the perfect fit, mark where you want to cut the shirt. Make sure you leave enough fabric at the bottom so that the tank top will stretch over your head.
Next, use a fabric marker or pen to draw a line around the entire shirt. This will be your cutting line. Once you have your cutting line, carefully cut off the bottom of the shirt. Be sure not to cut off too much!
Now that you have cut off the bottom of the shirt, it’s time to finish the raw edge. You can do this by using a serger or a sewing machine with a zigzag stitch. If you don’t have either of these machines, you can use a simple straight stitch and trim off any excess thread.
Once you have finished the raw edge, turn the shirt right side out and try it on! If everything looks good, you’re done! If not, make any necessary adjustments and enjoy your new tank top!
If it’s too loose, cut it off and try again.
T-shirts are the perfect piece of clothing for hot summer days, but sometimes they can be a little too loose and baggy. If you want to show off your muscles or keep cool while working out, you can easily turn a T-shirt into a tank top. With just a few snips of the scissors and some strategic knotting, you’ll have a new top that’s ready to hit the gym or the beach.
1. Put on the T-shirt and decide how loose or tight you want it to be. If it’s too loose, cut it off and try again. If it’s too tight, you may want to choose a different shirt.
2. Cut off the sleeves of the T-shirt, as close to the seam as possible.
3. Cut a horizontal line across the chest of the T-shirt, about 4 inches (10 cm) below the neckline. The cut should be straight across, not curved.
4. Cut 2 vertical lines down the front of the T-shirt, starting at the horizontal line you just cut and going all the way down to the bottom hem of the shirt. Each line should be about 6 inches (15 cm) wide.
5. Tie each of the vertical lines in a knot, close to the edge of the fabric so that it doesn’t unravel. You can make a regular knot or a double knot for extra security.
If it’s too tight, cut it off and try again.
A tank top is a great way to show off your shoulders and arms in the summer heat. If you have a T-shirt that’s too tight or you just don’t like the fit, you can easily turn it into a tank top. With just a few cuts, you can have a brand new piece of clothing that’s perfect for showing off your style.
1. Start by putting on the T-shirt and assessing where you want to make your cuts. You’ll want to cut off the sleeves and any extra fabric at the bottom of the shirt. Once you’ve decided where to make your cuts, mark them with a pen or chalk so you know where to cut.
2. Cut off the sleeves of the T-shirt at your marked lines. You can leave the edges raw or finish them off with a zigzag stitch if you’re concerned about them fraying.
3. Next, cut horizontal lines across the bottom of the T-shirt about 2-3 inches apart. These will be your slits for making the tank top straps. Again, you can leave the edges raw or finish them with a zigzag stitch.
4. Try on your newly cut T-shirt and adjust the slits to create straps that are comfortable for you. You can make them as wide or narrow as you like, just make sure they’re even on both sides. Once you’re happy with how they look, finish off the edges with a zigzag stitch if desired.
Once you’re happy with the fit, wear it and enjoy!
There’s no need to spend money on a new tank top when you can simply turn an old t-shirt into one! With just a few cuts, you can transform an ordinary t-shirt into a stylish and comfortable tank top.
To get started, you’ll need a t-shirt that fits you well. Lay the t-shirt flat on a surface and use a pen or marker to draw a line across the shirt about 4 inches (10 cm) below the armpit seams. Cut along this line with sharp scissors.
Next, cut off the sleeves of the shirt by cutting along the seem that runs from the armpit to the cuff of each sleeve. Once the sleeves are removed, cut along the side seams of the shirt, starting at the bottom hem and cutting up towards the newly created arm holes.
finally, cut a small v-shape out of the neckline of the shirt to create a more flattering neckline. Once you’re happy with the fit, wear it and enjoy!
